|
DC Imaging, LLC |
|
DC Zoom Lens with Adapter for Nikon Tool Makers Microscopes Fits models MM-11, MM-22, MM-40, MM-60, MM-400 and MM-800 |
|
Nikon’s Measuring Microscopes, when configured as shown at left with the binocular head and eyepieces, are only offered with fixed magnification lenses. This requires the user to unscrew one objective lens and screw in another to change the field-of-view. A zoom lens is available for the Video Head, which eliminates the binocular eyepiece tube and the superior optical image available there. Many operators would prefer that a zoom lens was available so they could zoom the image over a wide range for viewing through the eyepieces or to a video/digital camera.
DC Imaging has developed an adapter that permits the Optem Zoom Optical Systems to be mounted and used in a parfocal manner (the image stays centered and in focus as you zoom). This increases the capability and ease-of-use of the microscope substantially. Detents can be added that permit calibration at repeatable mag positions. Please contact us for compatibility questions.
Adapter for Nikon Tool Makers Microscopes to Optem Zoom Lenses $950 Zoom 70XL Optical System (0.75X to 10.5X zoom range) $817 Zoom 125C Optical System (0.5X to 13X zoom range) $1312
Typical MM-400 configuration with LED transmitted and reflected light, trinocular head with 10X eyepieces, 4” X 4” linear encoded stage with Quadra-Chek 120 digital readout, Zoom 70XL lens with adapter $17,500
Used MM-22 with O3L 2” X 4” travel Linear Encoded Stage, SC112 XY DRO (digital readout), binocular head with 10X eyepieces, camera port, 50W halogen transmitted and reflected illumination $13,000 |
|
Microscopes – Imaging Products - Computers - Training Office: 8290 Westberry Court West Chester, OH 45069 Phone: (513) 403-7732 Fax: (206) 984-1858 Email: info@dcimaging2000.com |